NCR Silver Support and Customer Care | NCR Silver NCR Silver
Questions?
Contact us at support line.
US: 877-270-3475
or
Log in to back office to chat with a representative

Visit NCR.com/Silver




Search:

Browse by categories

The Bixolon SRP-350 printer can connect through a wired connection or a Bluetooth connection. Using a wired connection, you can connect the printer to multiple iPads; however, using a Bluetooth connection, you can only connect the printer to one iPad.
 
User-added image
 

To use the Bixolon SRP-350 printer with a wired connection:
 
  1. Plug one end of the power cord into the back of the printer on the right side and the other end into an outlet.
  2. Plug one end of the Ethernet cable in to the Ethernet port on the back of the printer, and plug the other end into an available LAN port on your router.
To use the Bixolon SRP-350 printer with a Bluetooth connection:

You create a Bluetooth connection for the Bixolon SRP-350 by pairing the iPad to the printer.
 
  1. Tap Settings > Bluetooth.
  2. Swipe the Bluetooth button to the right to enable Bluetooth on the iPad. The system searches for discoverable devices.
  3. Tap the printer you want to pair to your iPad.
  4. Type the PIN. The PIN is ‘0000.’
  5. Tap Pair. When the iPad completes pairing to the printer, ‘Paired’ appears next to the printer name.
  6. Press the home button to exit the Bluetooth screen and return to the home screen.
To load paper into the Bixolon SRP-350 Printer:
 
  1. Press the cover open button on the top right side of the printer.
  2. Place a paper roll inside the compartment with the end of the roll on the bottom.
  3. Pull a portion of paper over the receipt paper roller and close the cover lid.
  4. Press the FEED button once to test the paper loaded correctly.
  5. Tear off the excess paper.

 
Press Room Privacy Policy Legal Notice FAQs ©2013 NCR Corporation. All Rights Reserved.