Hardware Setup | NCR Silver NCR Silver
Contact us at support line.
US: 877-270-3475
Log in to back office to chat with a representative

Visit NCR.com/Silver

Setting Up The Cling Stand

September 22, 2016


The cling stand can be drilled and screwed to the countertop, or secured with a durable adhesive tape (VHB pad) in two different mounting styles.
  • Before using the VHB pad, clean the base of the stand and the countertop with the alcohol wipe provided.

Fixed mount: Stand will secure directly to countertop or wall. The stand will not be able to rotate towards customer in the fixed mount. 
User-added image
  1. Secure the stand to the counter using 4 screws (all screws for the fixed mount are not included) or the durable adhesive pad (included)
  2. Place the dome shaped stand cover over the exposed screws 
  3. Note: you will not use the 3-hole rotation plate in the Fixed Mount method.
Rotating mount: The rotating mount offers a high level of security, and allows you to rotate the tablet to face the customer (for customer signature etc.)
User-added image
  1. Secure the rotation plate to the counter top using the 3 flathead screws provided or the VHB pad.
  2. Place the black rotation disc onto the screw of the rotation plate.
  3. Place the stand onto the screw of the rotation plate.
  4. Place the plastic washer around the rotation plate screw.
  5. Tighten the rotation locknut.
  6. (Optional) Place the dome shaped stand cover over the exposed screw.
Securing the Tablet 
  1. Route your tablet charging cable using one of the suggested methods in the image below. There is a hole in the back of the stand that allows you to route the charge cable.
  2. Place the "NCR" cover on the back of the stand.
    User-added image
  3. Use the screw driver provided to open the arms by turning the screws located in either arm counter clock-wise (to the left) 
  4. Place the tablet between the arms and tighten by turning the both arm screws clock-wise (to the right).
    User-added image
Changing from Landscape to Portrait
  1. While the iPad is not in the stand, remove the center cover piece between the arms.
  2. Tighten all 3 Phillip’s flat head screws by turning clockwise.
  3. Release the tension on each screw by with a counter-clockwise quarter turn.
  4. You should be able to easily rotate from portrait to landscape.
    User-added image

See the attached PDF for further visual instruction.
See Tablet Stand Options for more stand information

keywords: cling, stand, tablet


Installing the Cling Stand.pdf