Printers | NCR Silver

Questions?
Contact us at support line.
US: 877-270-3475
or
Log in to back office to chat with a representative

Visit NCR.com/Silver

Both
NCR Silver
NCR Silver Pro

Browse by categories

Welcome

NCR Silver

Silver Commerce

NCR Silver Pro Restaurant Edition

NCR Console

Silver Pro Restaurant

The Bixolon SRP-275ii printer connects to the router through a wired Ethernet connection. This printer is an impact printer ideal for use as a kitchen printer. Impact printers tend to be louder than a regular printer, which can alert kitchen staff to new orders. Also, image printers are not susceptible to image distortion, which can occur with thermal printers in a hot environment such as a kitchen.

To set up the Bixolon SRP-275ii printer with a wired connection:

Connect the power cord to the AC adaptor.
On the underneath side of the printer, insert the AC adaptor cord into the power connector.
Insert the AC adaptor into the slot underneath the printer.
Plug the power cord into the outlet.
Plug one end of the Ethernet cable into the Ethernet port on the back of the printer, and plug the other end into an available LAN port on your router.

Refer to Configuring Printers for a Device

To load paper into the Bixolon SRP-275ii printer:

Press the open button on the top right side of the printer to open the rear cover.
Place a paper roll inside the compartment with the end of the roll on the bottom.
Pull a portion of paper over the receipt paper roller and close the cover lid.
Press the FEED button once to test the paper loaded correctly.
Tear off the excess paper.

To insert the ribbon cassette for the Bixolon SRP-275ii printer:

Before inserting the ribbon cassette, turn the knob on top of the cassette clockwise to prevent twisting the ribbon.
Open the front cover.
Insert the ribbon cassette. Make sure you place the ribbon behind the printer head.
Turn the knob on the printer cassette clockwise to ensure the ribbon moves freely within the cassette.
Close the front cover of the printer.