Hardware SPR | NCR Silver NCR Silver
Questions?
Contact us at support line.
US: 877-270-3475
or
Log in to back office to chat with a representative

Visit NCR.com/Silver




Resetting Scanners

To rest scanners, plug the scanner into your point of sale terminal to allow it to power on. To do this, connect the USB plug into the point-of-sale terminal base and plug the opposite end (ethernet plug) into the base of the scanner.  Then follow the steps below and scan the appropriate bar code.

Socket Mobile 7ci scanner reset steps:
  1. Scan factory reset barcodes:
     
 
  1. Scan barcode based on needs
    1. For iOS:

    1. For Android:
       


Zebra DS2208 reset steps:
Scan following barcodes one by one:
  1. Set Defaults:
  2. Set USB Keyboard HID
  3. Add an Enter Key:
Note: Use the barcodes for DS2208 scanner, from the below document if the barcodes present on the page doesn't work.
Zebra DS9308 reset steps:
Scan following barcodes one by one:
  1. Set Factory Defaults
  1. USB Keyboard HID

 
  1. DATA><SUFFIX 1>