NCR Silver Support and Customer Care | NCR Silver NCR Silver
Questions?
Contact us at one of our country-specific support lines.
US: 877-270-3475
 UK: 0808-178-5520
AU: 1800-940-975
NZ: 0800-453-736
or
Log in to Silver Back Office to chat with a representative

Visit NCR.com/Silver


“To know I can check and see how the store is doing even without being there is very helpful.”
Reveille Joe Coffee, Coffee Shop


Search:

Browse by categories

Setting Up the Hover Stand

February 23, 2018

Description


The hover stand uses a durable adhesive to hold your tablet in place. It can be mounted to a wall or countertop, and can be used with a key lock for increased security.

  1. Clean the back of your tablet using the alcohol wipe provided
  2. Remove the cover on the adhesive, rectangle mounting piece
  3. Apply the mounting piece to the back of the tablet and allow 24 hours to fully adhere
    • Make sure you center the piece
    • Make sure the piece is set so the tablet display is right side up when mounted. The mount should open at the bottom like an upside down "U"
      User-added image
  4. Slide the mount onto the base of the stand
  5. (optional) press the silver cylinder in to lock the tablet to the stand. To unlock, insert the keys provided into the lock and turn to the right until the cylinder releases
User-added image



To mount the stand, drill two holes to match the holes in the stand. Screws are not provided.
User-added image

See the attached PDF for further visual instruction.
See Tablet Stand Options for more stand information.



keywords: hover, stand, tablet, mount
 

File

Installing the Hover Stand.pdf
Customer Support Article

Setting Up the Hover Stand

  • February 23, 2018
  • ·
  • Like
  • 0

Summary

PDF on setting up the tablet hover stand and written instructions.

Description


The hover stand uses a durable adhesive to hold your tablet in place. It can be mounted to a wall or countertop, and can be used with a key lock for increased security.

  1. Clean the back of your tablet using the alcohol wipe provided
  2. Remove the cover on the adhesive, rectangle mounting piece
  3. Apply the mounting piece to the back of the tablet and allow 24 hours to fully adhere
    • Make sure you center the piece
    • Make sure the piece is set so the tablet display is right side up when mounted. The mount should open at the bottom like an upside down "U"
      User-added image
  4. Slide the mount onto the base of the stand
  5. (optional) press the silver cylinder in to lock the tablet to the stand. To unlock, insert the keys provided into the lock and turn to the right until the cylinder releases
User-added image



To mount the stand, drill two holes to match the holes in the stand. Screws are not provided.
User-added image

See the attached PDF for further visual instruction.
See Tablet Stand Options for more stand information.



keywords: hover, stand, tablet, mount
 

Article Currency

USD