NCR Silver Support and Customer Care | NCR Silver NCR Silver
Questions?
Call us at 1-877-270-3475
or
Log in to Silver Back Office to chat with a representative

Visit NCRSilver.com

“To know I can check and see how the store is doing even without being there is very helpful.”
Reveille Joe Coffee, Coffee Shop


Search:

Browse by categories

Setting Up and Using the Credit Card Reader

NOTE: If you are using NCR Silver on a device running the Silver Register, the credit card reader is pre-attached to the unit.
 

User-added image

Our credit card reader is uniquely encrypted to work with our POS app.  Other credit card readers, not supplied by NCR, will not work with the POS app.

To plug the NCR credit card reader into the POS device:

Plug the credit card reader (and its adapter) into the charging dock port of your POS device.

User-added image

Use the attachment labeled "iPad 2 Sleeve" for the iPad 2 only.  Use the other sleeve for both the first and third generation iPads.  If you are using an iPhone or iPod Touch, use the sleeve labeled iPhone 4, iPhone 3G and 3Gs, or iPod, as appropriate.

  1. Identify the adapter for your specific iOS device that came with the NCR credit card reader and insert the credit card reader into the adapter.  Click here if you need help identifying the correct adapter to use.

  2. Plug the Micro USB (smaller) end of the charging cable that was included with the card reader into the port on the card reader.       
  3. Plug the other end of the USB charging cable into the Apple USB power adapter that came with your iOS device.  When you plug this power adapter into a power outlet, you will be charging your iOS device.

User-added image

User-added image

Do NOT plug the other end of the MSR charging cable into the USB port on either the receipt printer or the wi-fi dongle.  These devices have the incorrect wattage for charging your iOS device.



Keywords: set up credit card reader, 30-pin, lightning connector, setting up reader, msr, using the credit card reader

Customer Support Article

How to Set Up and Use the Credit Card Reader

  • October 4, 2016
  • ·
  • Like
  • 1

Summary

This article tells you how to plug the credit card reader to your POS device and other set up instructions.

Description

Setting Up and Using the Credit Card Reader

NOTE: If you are using NCR Silver on a device running the Silver Register, the credit card reader is pre-attached to the unit.
 

User-added image

Our credit card reader is uniquely encrypted to work with our POS app.  Other credit card readers, not supplied by NCR, will not work with the POS app.

To plug the NCR credit card reader into the POS device:

Plug the credit card reader (and its adapter) into the charging dock port of your POS device.

User-added image

Use the attachment labeled "iPad 2 Sleeve" for the iPad 2 only.  Use the other sleeve for both the first and third generation iPads.  If you are using an iPhone or iPod Touch, use the sleeve labeled iPhone 4, iPhone 3G and 3Gs, or iPod, as appropriate.

  1. Identify the adapter for your specific iOS device that came with the NCR credit card reader and insert the credit card reader into the adapter.  Click here if you need help identifying the correct adapter to use.

  2. Plug the Micro USB (smaller) end of the charging cable that was included with the card reader into the port on the card reader.       
  3. Plug the other end of the USB charging cable into the Apple USB power adapter that came with your iOS device.  When you plug this power adapter into a power outlet, you will be charging your iOS device.

User-added image

User-added image

Do NOT plug the other end of the MSR charging cable into the USB port on either the receipt printer or the wi-fi dongle.  These devices have the incorrect wattage for charging your iOS device.



Keywords: set up credit card reader, 30-pin, lightning connector, setting up reader, msr, using the credit card reader

Article Currency

USD